Zanussi ZDI12010XA User Manual

ENUser manualDishwasherZDI12010XA

Cleaning the filters1CBA2345D678To remove filters (B) and (C), turn the handlecounterclockwise and remove. Pull apart filter(B) and (C). Wash the filt

Alarm code Problem• The start indicator flashes continuously.• The end indicator flashes 1 time intermittently.The appliance does not fill with water.

• The quality of the detergent can be thecause.Dishes are wet• The programme is without a drying phase orwith a low temperature drying phase.• The rin

13www.zanussi.com

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 156970840-A-362013

ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• The water inlet hose has a safety valve anda sheath with an inner mains cable.Warning! Dangerous voltage.•If the water inlet hose is damaged, imme-d

Control panel1 2 34561On/off indicator2Programme marker3Indicators4Delay button5Start button6Programme knobIndicators DescriptionWashing phase indicat

Programme1)Degree of soilType of loadProgrammephasesDuration(min)Energy(kWh)Water(l) 3)Normal soilCrockery and cut-leryPrewashWash 50 °CRinsesDry195 1

Water hardnessWater softeneradjustmentGermandegrees(°dH)Frenchdegrees(°fH)mmol/l ClarkedegreesLevel11 - 14 19 - 25 1.9 - 2.5 13 - 17 34 - 10 7 - 18 0.

1234A3214Fill the rinse aid dispenser when the lens(A) is clear.To adjust the released quantity of rinse aid,turn the selector between position 1 (l

3. Start the shortest programme with a rins-ing phase, without detergent and withoutdishes.4. Adjust the water softener to the waterhardness in your a

Hints and tipsThe water softenerHard water contains a high quantity of miner-als that can cause damage to the applianceand bad washing results. The wa