Zanussi ZDT12002FA User Manual download pdf (Page 22)

Put the detergent or the

tablet in compartment (A).

If the programme has a

prewash phase, put a

small quantity of detergent

in compartment (B).

Detergent tablets do not fully dissolve with short

programmes and detergent residues can stay on the

dishes.

We recommend that you use detergent tablets with long

programmes.

Combi detergent tablets

These tablets contain detergent, rinse aid and other added

agents. Be sure that these tablets are applicable to the wa-

ter hardness in your area. Refer to the instructions on the

packaging of the products.

When you use tablets, that contain salt and rinse aid, do

not fill the salt container and the rinse aid dispenser. The

rinse aid indicator always comes on if the rinse aid dis-

penser is empty.

1. Adjust the water softener to the lowest level.

2. Set the rinse aid dispenser to the lowest position.

If you stop to use the combi detergent tablets, before you

start to use separately detergent, rinse aid and dishwasher

salt, do these steps:

1. Press the on/off button to activate the appliance.

2. Set the water softener to the highest level.

3. Make sure that the salt container and the rinse aid

dispenser are full.

4. Start the shortest programme with a rinsing phase,

without detergent and without dishes.

5. Adjust the water softener to the water hardness in

your area.

6. Adjust the released quantity of rinse aid.

Setting and starting a programme

Setting mode

The appliance must be in setting mode to accept some

operations.

The appliance is in setting mode when, after the activa-

tion:

• All the programme indicators are off.

• The end indicator flashes.

If the control panel shows other conditions, press and

hold the programme button until the appliance is in set-

ting mode.

Starting a programme

1. Open the water tap.

2. Press the on/off button to activate the appliance.

Make sure that the appliance is in setting mode.

3. Press continuously the programme button until the

indicator of the programme you want to set comes on.

4. Close the appliance door. The programme starts.

Opening the door while the appliance operates

If you open the door, the appliance stops. When you close

the door, the appliance continues from the point of inter-

ruption.

Cancelling the programme

1. Open the appliance door.

2. Press and hold the programme button until the indi-

cator of the set programme goes off and the end indi-

cator flashes.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Comments to this Manuals

No comments

Zanussi ZDT12002FA User Manual Page 22

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT12002FA