Zanussi ZDT12002FA User Manual download pdf (Page 12)

Problem Possible cause Possible solution

The programme was not applicable for

the type of load and soil.

Make sure that the programme is applica-

ble for the type of load and soil.

Incorrect position of the items in the

baskets. Water could not wash all items.

Make sure that the position of the items in

the baskets is correct and that the water

can easily wash all items.

The spray arms could not turn freely. Make sure that the position of the items in

the baskets is correct and does not cause

the blockage of the spray arms.

The quantity of detergent was not suffi-

cient.

Make sure that you add the correct quan-

tity of detergent in the dispenser before

you start a programme.

There was no detergent in the detergent

dispenser.

Make sure that you add detergent in the

dispenser before you start a programme.

Limescale particles on the

dishes.

The salt container is empty. Make sure that there is dishwasher salt in

the salt container.

The set level of the water softener is in-

correct.

Make sure that the set level of the water

softener agrees with the water hardness in

your area.

The cap of the salt container is loose. Tighten the cap.

Whitish streaks and stains or

bluish layers on glasses and

dishes.

The released quantity of rinse aid is too

much.

Decrease the released quantity of rinse

aid .

The quantity of detergent was too much. Make sure that you add the correct quan-

tity of detergent in the dispenser before

you start a programme.

Dry water drop stains on

glasses and dishes.

The released quantity of rinse aid was

not sufficient .

Increase the released quantity of rinse aid.

The quality of the detergent can be the

cause.

Try a different brand of detergent.

The dishes are wet. • The programme had no drying phase.

• The programme had a low tempera-

ture drying phase.

For better drying results, keep the door

ajar for some minutes.

The dishes are wet and matt. The rinse aid dispenser is empty. Make sure that there is rinse aid in the

rinse aid dispenser.

The quality of the rinse aid can be the

cause.

Try a different brand of rinse aid.

Technical information

Dimensions Width / Height / Depth (mm) 596 / 818-898 / 555

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Zanussi ZDT12002FA User Manual Page 12

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT12002FA