Zanussi ZDT12002FA User Manual download pdf (Page 5)

Programme

Duration (min) Energy (kWh) Water (l)

12 0,1 5

1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the

programme duration and the consumption values.

Options

Acoustic signals

The acoustic signals operate in these conditions:

• When the programme is completed.

• A malfunction occurs to the appliance.

Factory setting: on.

You can deactivate the acoustic signals.

Deactivating the acoustic signals

1. Press the on/off button to activate the appliance.

2. Make sure that the appliance is in setting mode. Refer

to ‘SETTING AND STARTING A PROGRAMME’.

3. Press and hold the programme button until the pro-

gramme indicator (A) flashes and the programme in-

dicator (B) comes on.

4. Press immediately the programme button.

• The programme indicator (A) comes on with a

fixed light.

• The programme indicator (B) starts to flash.

5. Wait until the programme indicator (A) goes off and

the end indicator comes on (the programme indicator

(B) continues to flash).

• The acoustic signals are on.

6. Press the programme button. The end indicator goes

off.

• The acoustic signals are off.

7. Deactivate the appliance to confirm.

Activating the acoustic signals

1. Refer to ‘Deactivating the acoustic signals’, step (1)

through (4).

2. Wait until the programme indicator (A) goes off. The

end indicator is off and programme indicator (B) con-

tinues to flash.

• The acoustic signals are off.

3. Press the programme button. The end indicator

comes on.

• The acoustic signals are on.

4. Deactivate the appliance to confirm.

Half-load

Activate or deactivate the function before the start of

a programme. You cannot activate or deactivate this

function while a programme operates.

Set this function when you want to wash a small quantity

of tableware and cookware. The function decreases the

programme duration and the consumption of energy and

water.

Load the upper basket and the lower basket and decrease

the quantity of detergent.

Before first use

1. Make sure that the set level of the water softener

agrees with the water hardness in your area. If not,

adjust the water softener. Contact your local water au-

thority to know the water hardness in your area.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Processing residues can stay in the appliance. Start a

programme to remove them. Do not use detergent

and do not load the baskets.

Adjusting the water softener

Hard water contains a high quantity of minerals that can

cause damage to the appliance and bad washing results.

The water softener neutralises these minerals.

The dishwasher salt keeps the water softener clean and in

good conditions. Refer to the table to adjust the water

softener to the right level. It makes sure that the water

softener uses the correct quantity of dishwasher salt and

water.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Zanussi ZDT12002FA User Manual Page 5

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT12002FA