Zanussi ZDT12002FA User Manual download pdf (Page 9)

3. Make sure that the salt container and the rinse aid

dispenser are full.

4. Start the shortest programme with a rinsing phase,

without detergent and without dishes.

5. Adjust the water softener to the water hardness in

your area.

6. Adjust the released quantity of rinse aid.

Setting and starting a programme

Setting mode

The appliance must be in setting mode to accept some

operations.

The appliance is in setting mode when, after the activa-

tion:

• All the programme indicators are off.

• The end indicator flashes.

If the control panel shows other conditions, press and

hold the programme button until the appliance is in set-

ting mode.

Starting a programme

1. Open the water tap.

2. Press the on/off button to activate the appliance.

Make sure that the appliance is in setting mode.

3. Press continuously the programme button until the

indicator of the programme you want to set comes on.

4. Close the appliance door. The programme starts.

Opening the door while the appliance operates

If you open the door, the appliance stops. When you close

the door, the appliance continues from the point of inter-

ruption.

Cancelling the programme

1. Open the appliance door.

2. Press and hold the programme button until the indi-

cator of the set programme goes off and the end indi-

cator flashes.

Make sure that there is detergent in the detergent

dispenser before you start a new programme.

At the end of the programme

When the programme is completed, an intermittent acous-

tic signal operates.

1. Open the appliance door.

• The end indicator is on.

2. Press the on/off button to deactivate the appliance.

3. Close the water tap.

• For better drying results, keep the appliance door ajar

for some minutes.

• Let the dishes become cold before you remove them

from the appliance. Hot dishes can be easily damaged.

• First remove the items from the lower basket, then from

the upper basket.

There can be water on the sides and on the door of

the appliance. Stainless steel becomes cool more

quickly than the dishes.

Care and cleaning

Warning!

Before maintenance, deactivate the appliance and discon-

nect the mains plug from the mains socket.

Dirty filters and clogged spray arms decrease the

washing results.

Make a check regularly and, if necessary, clean them.

Cleaning the filters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Zanussi ZDT12002FA User Manual Page 9

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT12002FA