Zanussi ZDT24003FA User Manual download pdf (Page 13)

• To maintain the performance of your appliance

at its best, we recommend to use monthly a

specific cleaning product for dishwashers.

Follow carefully the instructions on the

packaging of the product.

TROUBLESHOOTING

If the appliance does not start or it stops during

operation, before you contact an Authorised

Service Centre, check if you can solve the problem

by yourself with the help of the information in the

table.

WARNING! Repairs not properly done

may result in serious risk to the safety

of the user. Any repairs must be

performed by qualified personnel.

With some problems the end indicator flashes

intermittently indicating a malfunction.

The majority of problems that can occur can

be solved without the need to contact an

Authorised Service Centre.

Problem and alarm code Possible cause and solution

You cannot activate the appliance. • Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

The programme does not start. • Make sure that the appliance door is closed.

• If the delay start is set, cancel the setting or wait for

the end of the countdown.

• The appliance has started the procedure to re-

charge the resin inside the water softener. The dura-

tion of the procedure is approximately 5 minutes.

The appliance does not fill with water.

• The end indicator flashes 1 time inter-

mittently.

• Acoustic signal sounds 1 time intermit-

tently.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is

not too low. For this information, contact your local

water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clog-

ged.

• Make sure that the inlet hose has no kinks or bends.

The appliance does not drain the water.

• The end indicator flashes 2 times inter-

mittently.

• Acoustic signal sounds 2 times inter-

mittently.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or

bends.

The anti-flood device is on.

• The end indicator flashes 3 times inter-

mittently.

• Acoustic signal sounds 3 times inter-

mittently.

• Close the water tap and contact an Authorised

Service Centre.

The appliance stops and starts more

times during operation.

• It is normal. It provides optimal cleaning results and

energy savings.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi ZDT24003FA User Manual Page 13

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT24003FA