Zanussi ZDT24003FA User Manual download pdf (Page 8)

1. Press .

The indicators:

and are off.

The indicator still flashes.

The indicator indicates the current setting. If

on = AirDry is on, if off = AirDry is off.

2. Press to change the setting.

3. Press on/off to confirm and save the setting.

CAUTION! If children have access to

the appliance, it is advised to

deactivate AirDry as opening the door

may pose a danger.

BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the hardness

of the water supply. If not, adjust the level

of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance.

Do not use detergent and do not load the

baskets.

After starting a programme, it may take up to 5

minutes for the appliance to recharge the resin in

the water softener. It seems that the appliance is

not working. The washing phase starts only after

this procedure is completed. The procedure is

repeated periodically.

THE SALT CONTAINER

CAUTION! Use rough salt designed

for dishwashers only. Fine salt

increases the risk of corrosion.

The salt is used to recharge the resin in the water

softener and to assure good washing results in

daily use.

Adding salt

Before the first use, put one litre of water in the salt container.

CAUTION!

Water and salt can come out of the salt container during filling. To prevent corrosion, start a programme

immediately after filling the salt container.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Zanussi ZDT24003FA User Manual Page 8