Zanussi ZDT311 User Manual download pdf (Page 12)

2. Release function buttons B and C to cancel the wash-

ing programme.

At this time you can do these steps:

1. Switch off the appliance.

2. Set a new washing programme .

Fill the detergent dispenser with detergent before you set

a new washing programme.

Interrupting a washing programme

Open the door.

• The programme stops.

Close the door.

• The programme continues from the point of interrup-

tion.

Setting and starting a washing programme with

delay start

1. Press the on/off button.

2. Set a washing programme.

– The programme indicator light comes on.

3. Press the delay start button until the indicator light

with the correct number of hours starts to flash (3, 6,

or 9 hours).

4. Close the door.

– The countdown of the delay start starts.

– The countdown of the delay start decreases with

steps of 3 hours.

When the countdown is completed, the washing

programme starts automatically.

Do not open the door during the countdown to pre-

vent interruption of the countdown. When you close

the door again, the countdown continues from the point

of interruption.

Cancelling a delay start:

1. Press and hold function buttons B and C until all the

programme lights come on.

– When you cancel a delay start, you also cancel the

washing programme.

2. Set a new washing programme.

End of the washing programme

Switch off the appliance in these conditions:

• The appliance stops automatically.

• The audible signals for the end of the programme op-

erate.

1. Open the door.

– The end indicator light comes on.

– The programme indicator light stays on.

2. Press the on/off button.

3. For better drying results, keep the door ajar for some

minutes before you remove the dishes.

Let the dishes cool down before you remove them from

the appliance. Hot dishes are easily damaged.

Removing the load

• First remove items from the lower basket, then from

the upper basket.

• There can be water on the sides and door of the appli-

ance. Stainless steel becomes cool more quickly than

the dishes.

Care and cleaning

Warning! Switch the appliance off before you clean

the filters.

Cleaning the filters

Important! Do not use the appliance without the filters.

Make sure that the installation of the filters is correct.

Incorrect installation will cause unsatisfactory washing

results and damage to the appliance.

Fully clean the filters A, B

and C below running wa-

ter.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi ZDT311 User Manual Page 12

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT311