Zanussi ZDT311 User Manual download pdf (Page 4)

Indicator lights

The indicator light comes on when the washing pro-

gramme is completed. Auxiliary functions:

• Level of the water softener.

• Activation/deactivation of the audible signals.

• Activation/deactivation of the rinse aid dispenser.

• An alarm if the appliance has a malfunction.

1) The indicator light is off while a washing programme operates.

Function buttons

Use the function buttons for these operations:

• To set the water softener. Refer to the chapter 'Setting

the water softener'.

• To deactivate/activate the audible signals. Refer to the

section 'Audible signals'.

• To activate/deactivate the multitab function. Refer to

the chapter 'Multitab function'.

• To deactivate/activate the rinse aid dispenser when

multitab function is active. Refer to the chapter 'Mul-

titab function'.

• To cancel the washing programme in progress or a

delay start in progress. Refer to the chapter 'Setting

and starting a washing programme'.

Delay start button

Use the delay start button to delay the start of the washing

programme with an interval of 3, 6 or 9 hours. Refer to

the chapter 'Setting and starting a washing programme'.

Setting mode

The appliance is in setting mode when all the programme

indicator lights are on.

The appliance must be in setting mode for these opera-

tions:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the audible signals.

– To deactivate/activate the rinse aid dispenser.

If a programme indicator light is on, cancel the pro-

gramme to go back to the setting mode. Refer to the

chapter "Setting and starting a washing programme".

Audible signals

You can hear an audible signal:

• At the end of the washing programme.

• During the setting of the level of the water softener.

• When the appliance has a malfunction.

The activation of the audible signals is set at the factory.

Do these steps to deactivate the audible signals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons B and C until the

indicator lights of function buttons A, B and C start

to flash.

4. Press the function button C.

– Indicator lights for function buttons A and B go

off.

– Indicator light for function button C starts to flash.

– The end indicator light comes on.

The audible signals are activated.

5. Press the function button C again.

– The end indicator light goes off.

The audible signals are deactivated.

6. Switch off the appliance to save the operation.

Do these steps to activate the audible signals:

1. Do the above procedure until the end indicator light

comes on.

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Zanussi ZDT311 User Manual Page 4

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT311