Zanussi ZBA30455SA User Manual download pdf (Page 19)

Operation

Operation

1 2

4 3

1. Temperature indicator LED

2. QuickFreeze indicator

3. QuickFreeze

4. Temperature regulator

ON/OFF button

Switching on

1. Insert the plug into the wall socket.

2. Touch the temperature regulator button if all

LED are off.

Switching off

Keep touching the temperature regulator button

for 3 seconds.

All indicators light off.

Temperature regulation

To operate the appliance, proceed as follows:

• touch the temperature regulator button until

the LED corresponding to the required

temperature lights up. Selection is

progressive, varying from 2 to 8°C.

At first button touch actual setting LED

keeps blinking.

Any time the button is touch the set

temperature is moved to 1 position .

Corresponding LED will blink for a while.

Touch the setting button until the required

temperature is selected. The set will be fixed

coldest setting: +2°C warmest

setting: +8°C A medium setting is

generally the most suitable.

However, the exact setting should be chosen

keeping in mind that the temperature inside the

appliance depends on:

• room temperature

• how often the door is opened

• quantity of food stored

• appliance location.

QuickFreeze function

You can activate the QuickFreeze function by

pressing the QuickFreeze button.

The LED corresponding to the symbol

QuickFreeze indicator lights up.

You can deactivate the QuickFreeze function by

pressing the QuickFreeze button again.

The QuickFreeze indicator will light off.

This function stops automatically

after 52 hours.

Daily use

WARNING!

Refer to Safety chapters.

Freezing fresh food

The freezer compartment is suitable for freezing

fresh food and storing frozen and deep-frozen

food for a long time.

To freeze fresh foods it is not necessary to

change the medium setting.

However, for a faster freezing operation, turn

the temperature regulator toward higher

settings to obtain the maximum coldness.

CAUTION!

In this condition, the refrigerator

compartment temperature might

drop below 0°C. If this occurs reset

the temperature regulator to a

warmer setting.

www.zanussi.com 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Comments to this Manuals

No comments