ENZBB27450SAUser ManualFridge Freezer
Problem Possible cause SolutionThere is no cold air circulationin the appliance.Make sure that there is cold air cir-culation in the appliance.If the
InstallationWARNING!Refer to Safety chapters.PositioningThis appliance can be installed in a dry, wellventilated indoor where the ambienttemperature c
letter “E“ or by the earth symbol orcoloured green and yellow.2. Connect the wire coloured blue to theterminal either marked with the letter “N“ orc
Installing the applianceMake sure that the mains cable canmove freely.1. If necessary cut the adhesive sealing stripand then apply it to the appliance
Ha HbHdHca. Install the part (Ha) on the inner side ofthe kitchen furniture.21 mm21 mm~50 mm~50 mm90o90ob. Push the part (Hc) on the part (Ha).HaHc14.
household waste. Return the product to yourlocal recycling facility or contact your municipaloffice.www.zanussi.com 15*
www.zanussi.com/shop222371023-A-472014
ContentsSafety information 2Safety instructions 3Operation 4Daily Use 5Hints and tips 6Care and cleaning 7Troubleshooting 8Technical information 10Ins
• Do not use mechanical devices or other means to acceleratethe defrosting process, other than those recommended by themanufacturer.• Do not damage th
UseWARNING!Risk of injury, burns, electrical shockor fire.• Do not change the specification of thisappliance.• Do not put electrical appliances (e.g.
1. Turn the Temperature regulator towardlower settings to obtain the minimumcoldness.2. Turn the Temperature regulator towardhigher settings to obtain
Ice-cube productionThis appliance is equipped with one or moretrays for the production of ice-cubes.Do not use metallic instruments toremove the trays
Hints for freezingTo help you make the most of the freezingprocess, here are some important hints:• the maximum quantity of food which can befrozen in
Defrosting the freezerCAUTION!Never use sharp metal tools toscrape off frost from the evaporatoras you could damage it. Do not usea mechanical device
Problem Possible cause SolutionThe appliance is noisy. The appliance is not supportedproperly.Check if the appliance stands sta-ble.The compressor ope
Comments to this Manuals