Zanussi ZRG616CW User Manual download pdf (Page 19)

Location

The appliance should be installed well away from sources

of heat such as radiators, boilers, direct sunlight etc. En-

sure that air can circulate freely around the back of the

cabinet. To ensure best performance, if the appliance is

positioned below an overhanging wall unit, the minimum

distance between the top of the cabinet and the wall unit

must be at least 100 mm . Ideally, however, the appliance

should not be positioned below overhanging wall units.

Accurate levelling is ensured by one or more adjustable

feet at the base of the cabinet.

If the cabinet is placed in a corner and the side with the

hinges facing the wall, the distance between the wall and

the cabinet must be at least 10 mm to allow the door to

open enough so that the shelves can be removed.

Warning!

min.100 mm

15 mm

It must be possible to disconnect the appliance from the

mains power supply; the plug must therefore be easily ac-

cessible after installation.

Door reversibility

Important! To carry out the following operations, we

suggest that this be made with another person that will

keep a firm hold on the doors of the appliance during the

operations.

To change the opening direction of the door, do these

steps:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

No comments

Zanussi ZRG616CW User Manual Page 19