Zanussi ZOB21301LR User Manual download pdf (Page 13)

Aqua cleaning

The Aqua cleaning procedure uses steam to

help remove remaining fat and food particles

from the oven.

1. Put 300 ml of water into the Aqua cleaning

container at the bottom of the oven.

2. Set the function .

3. Set the temperature to 90 °C.

4. Let the appliance operate for 30 minutes.

5. Deactivate the appliance and let it cool

down.

6. When the appliance is cool, clean the inner

surfaces of the oven with a cloth.

WARNING!

Make sure that the appliance is

cool before you touch it. There is

a risk of burns.

Cleaning the oven door

The oven door has two glass panels. You can

remove the oven door and the internal glass

panel to clean it.

The oven door can close if you try to

remove the internal glass panel

before you remove the oven door.

CAUTION!

Do not use the appliance without the

internal glass panel.

1

Open the door fully

and hold the two

door hinges.

1

2

Lift and turn the

levers on the two

hinges.

2

3

Close the oven door

halfway to the first

opening position.

Then pull forward and

remove the door from

its seat.

3

4

Put the door on a soft

cloth on a stable

surface.

4

5

Release the locking

system to remove the

internal glass panel.

5

90°

6

Turn the two

fasteners by 90° and

remove them from

their seats.

6

2

1

7

First lift carefully and

then remove the

glass panel.

7

Clean the glass panel with water and soap. Dry

the glass panel carefully.

When the cleaning is completed, install the

glass panel and the oven door. Do the above

steps in the opposite sequence.

The screen-printing zone must face the inner

side of the door. Make sure that after the

installation the surface of the glass panel frame

on the screen-printing zones is not rough when

you touch it.

Make sure that you install the internal glass

panel in the seats correctly.

www.zanussi.com 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments