Zanussi ZOB31301XK User Manual download pdf (Page 13)

Release the lock-

ing system to remove

the internal glass

panel.

90°

Turn the two fas-

teners by 90° and re-

move them from their

seats.

Carefully lift (step

1) and remove (step

2) the glass panel.

Clean the glass panel with water and soap. Dry

the glass panel carefully.

Installing the door and the glass panel

When the cleaning is completed, install the

glass panel and the oven door. Do the above

steps in the opposite sequence.

The screen-printing zone must face the inner

side of the door. Make sure that after the instal-

lation the surface of the glass panel frame on

the screen-printing zones is not rough when

you touch it.

Make sure that you install the internal glass

panel in the seats correctly. Refer to the illustra-

tion.

What to do if…

Warning! Refer to the Safety chapters.

Problem Possible cause Remedy

The appliance does not operate. The appliance is not activated. Activate the appliance. Refer to

the chapter "Daily Use".

The appliance does not operate. The fuse in the fuse box is re-

leased.

Do a check of the fuse. If the fuse

is released more than one time,

contact a qualified electrician.

The oven lamp does not operate. The oven lamp is defective. Replace the oven lamp.

Steam and condensation collect

on the food and in the oven.

You left the dish in the oven for

too long.

Do not keep the dishes in the

oven for longer than 15 - 20 mi-

nutes after the cooking ends.

If you cannot find a solution to the problem

yourself, contact your dealer or the service cen-

tre.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity.

We recommend that you write the data here:

www.zanussi.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Zanussi ZOB31301XK User Manual Page 13

Comments to this Manuals

Related products and manuals for Ovens Zanussi ZOB31301XK