Zanussi ZDH8333W User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
CAUTION!
Do not use furniture cleaning agents
or cleaning agents which can cause
corrosion to clean the appliance.
Cleaning the airflow slots
Use a vacuum cleaner to remove the fluff from
the airflow slots.
Troubleshooting
Problem Possible solution
You cannot activate the appliance. Make sure that the mains plug is connected to the
mains socket.
Check fuse in fuse box (domestic installation).
The programme does not start. Press Start/Pause.
Make sure that the appliance door is closed.
The appliance door does not close. Make sure that the installation of the filter is cor-
rect.
Make sure that the laundry does not catch between
the appliance door and the rubber seal.
The appliance stops during operation. Make sure that the water container is empty. Press
Start/Pause to start the programme again.
The display shows a long programme duration.
1)
Make sure that the weight of the laundry is applica-
ble to the duration of the programme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in the
washing machine again.
Make sure that the room temperature is not too
warm.
The display shows a short programme duration. Set the Time Drying or the Extra Dry programme.
The display shows Err. If you want to set a new programme, deactivate
and activate the appliance.
Make sure that the options are applicable to the
programme.
The display shows (e.g. E51). Deactivate and activate the appliance. Start a new
programme. If the problem occurs again, contact
the Service.
1) After maximum 5 hours, the programme ends automatically
If the drying results are not satisfactory
The set programme was incorrect.
The filter is clogged.
The condenser is clogged.
There was too much laundry in the
appliance.
The drum is dirty.
Incorrect setting of the conductivity sensor.
The airflow slots are clogged.
28 www.zanussi.com
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Comments to this Manuals

No comments