Zanussi ZWD81663W User Manual

GETTING STARTED?EASY.User ManualZWD 81663 WEN User ManualWasher Dryer

Programme 2) 1) Only the QUICK option is available.2) Available only if the last spin speed step is l

Dryness Level Type of fabric Load (kg)Spinspeed(rpm)Suggestedduration(mins)Cupboard DryFor items to put awayCottons and Linen(bathrobes, bath towels,

Programmes Load (kg)Energy con-sumption(kWh)Water con-sumption (litre)Approximate pro-gramme duration (mi-nutes)Delicates 40 °C3.5 0.50 55 80Wool/Hand

• QUICK: to wash items with daily soil.• SUPER QUICK: to wash quickly items withalmost no soil.Some programmes accept only one ofthese options.SETTI

USING DETERGENT AND ADDITIVES1. Measure out the de-tergent and the fabricconditioner.2. Put the detergentand the fabric condi-tioner into the com-part

• The drain pump can operate for a short timewhen the appliance fills water.After approximately 15 minutes fromthe start of the programme:• The applia

To drain the water:1. If necessary, decrease the spin speed. If youset , the appliance only drains.2. Press . The appliance drains the water andspin

calculates also the duration of the anti-crease and the cooling phases.2. Press to start the programme.• The display shows regularly a new timevalue

shows the final time value , that is the totalduration of the washing and drying cycles (washing+ drying + anti-crease + cooling phases).If you set o

DETERGENTS AND ADDITIVES• Only use detergents and additives speciallymade for washing machines:– powder detergents for all types of fabric,– powder de

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible if a

When the drying programme is completed removethe laundry in a short time.CARE AND CLEANINGWARNING! Refer to Safety chapters.EXTERNAL CLEANINGClean the

12112 3214125 6 72189CLEANING THE INLET HOSE AND THE VALVE FILTER1231 2 345°20°4EMERGENCY DRAINBecause of a malfunction, the appliance cannotdrain the

WARNING! Make sure that thetemperature is more than 0 °C beforeyou use the appliance again.The manufacturer is not responsiblefor damages caused by lo

Problem Possible solutionMake sure that the connection of the water inlet hose is correct.The appliance does not fillwith water and drain imme-diately

Problem Possible solutionThe cycle is shorter thanthe time displayed.The appliance calculates a new time according to the laundry load.See the ‘Consum

To open the door, proceed as follows:1. Turn the selector to position to switch theappliance off.2. Disconnect the mains plug from the mainssocket.3.

26

27

WWW.ZANUSSI.COM/SHOP132901080-B-452015

• The ventilation openings in the base (if applicable) must not beobstructed by a carpet.• Ensure you have good ventilation in the installation room t

• The final part of a wash dryer cycle occurs without heat (cooldown cycle) to ensure that the items are left at a temperaturethat ensures that the it

• Only dry fabrics which are applicable to dry inthe washer-dryer. Follow the instructions on thefabric label.• Plastic items are not heat resistant.–

CONTROL PANELCONTROL PANEL DESCRIPTION1 2 3 49101176851Programme knob2Spin reduction (Spin)3Temperature (Temp.)4Display5Drying time (Drying Time

ATime area: Programme duration : Selected drying time : Delay start : Alarm codes : Message of error : The programme is completed.Time programme indic

ProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)2) Wool40°C - (Cold)1.5 kg1200 rpmMachine w

ProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level) Miniprogramme30°C1.5 kg800 rpmA short cycle