Zanussi ZWG7160P User Manual

ENUser manualWashing MachineZWG 7160 AP

Mount the rubber feet to prevent vibration, noises and dis-placement of the appliance during operation.Read carefully the instructions supplied with t

Before Loading The LaundryImportant! Make sure thatno metal objects are left inthe laundry (e.g. hair clips,safety pins, pins). Buttonup pillowcases,

Although biodegradable, detergents contain substanceswhich, in large quantities, can upset the delicate balanceof nature.The choice of detergent will

• Measure out the deter-gent.• Pour the powder deter-gent into the main washcompartment .The flap is up and you wish to use liquid detergent:• Rotate

1 791082 3 4 5 61Programme selector dialTurn the programme selector dial to the required programme. The selectordial can be turned either clockwise or

3Spin Reduction1600900700neregufirtneCegarossEBy selecting a programme, the appliance proposes automatically the maxi-mum spin speed provided for that

7Display7.17.27.3The display shows the following information:7.1 Delay Start icon7.2 Child safety lockThis device permits you to leave the appliance u

You can cancel or modify the delay time at any moment, before you pressbutton 9.Selecting the delay start :• Select the programme and the required

10Door lightDeuretroPezuaP/tratSesuaP/trapéDThe pilot light 10 illuminates when the programme starts and indicates if thedoor can be opened:• light on

Programme - Maximum and Minimum Temperature - Cycle De-scription - Maximum Spin Speed - Maximum Fabrics Load - Typeof LaundryOptionsDetergent Com-part

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Environment concerns _ _ _ _

Programme - Maximum and Minimum Temperature - Cycle De-scription - Maximum Spin Speed - Maximum Fabrics Load - Typeof LaundryOptionsDetergent Com-part

Programme - Maximum and Minimum Temperature - Cycle De-scription - Maximum Spin Speed - Maximum Fabrics Load - Typeof LaundryOptionsDetergent Com-part

The actual water temperature may differ from the de-clared cycle temperature.Care and cleaningWarning! Switch the appliance off and remove themains pl

• turn the drum and alignthe filter cover (FILTER)with the arrow on thedoor seal;• open the filter cover bypressing the specialhook and by rotatingthe

• Screw the hose back onto the tap. Make sure theconnection is tight.• Unscrew the hose fromthe appliance. Keep atowel nearby becausesome water may fl

Fault code and malfunction Possible cause / SolutionProblem with the water drain-ageThe drain hose is squashed or kinked.• Check the drain hose connec

Malfunction Possible cause / SolutionThe appliance does not start:The plug is not properly inserted in the power socket.• Insert the plug into the pow

Malfunction Possible cause / SolutionThe appliance vibrates noisi-ly:The transit bolts and packing have not been removed.• Check the correct installat

The necessary data for the service centre is on the rat-ing plate. We recommend that you write the data here:Mod. ... ... ...Prod. No. ... ... ...

29

not pressing the electrical supply cable against thewall.• Install the appliance on a flat hard floor.• Never place cardboard, wood or similar materia

30

31

www.zanussi.com/shop 132936420-A-102011

To activate this device, ro-tate the button (withoutpressing it) inside thedoor clockwise until thegroove is horizontal. Ifnecessary use a coin.To dis

>PP<=polypropyleneThis means that they can be recycled by disposing ofthem properly in appropriate collection containers.Ecological hintsTo save

Spin Speed Maximum 1600 rpmInstallationUnpackingWarning!• Read carefully the "Safety information" chapterbefore installing the appliance.x 3

• Remove the power supply cable and the draining andinlet hose from the hose holders (C) on the rear ofthe appliance.• Unscrew the three bolts (A) and

Level the appliance by raising or lowering the feet.The appliance MUST be level and stable on a flat hardfloor. If necessary, check the setting with a

MAX 100cmThe end of the drain hosemust always be ventilated,i.e. the inside diameter ofthe drain pipe must belarger than the outside di-ameter of the