Zanussi ZWF 12380W User Manual

ENUser manual 2Washing MachineZWF 12380WZWF 14380W

Removing stainsStubborn stains may not be removed by just water anddetergent. It is therefore advisable to treat them prior towashing.Blood: treat fre

Washing programmesProgramme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum Fabrics Load- Type of LaundryOptions D

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum Fabrics Load- Type of LaundryOptions Detergent drawerSyn

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum Fabrics Load- Type of LaundryOptions Detergent drawerSpi

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum Fabrics Load- Type of LaundryOptions Detergent drawerSpo

Problem Possible cause/SolutionThe machine does not start:The door has not been closed. • Close the door firmly.The plug is not properly inserted in t

Problem Possible cause/SolutionThere is water on the floor:Too much detergent or unsuitable detergent (creates too much foam) has beenused.• Reduce th

Problem Possible cause/SolutionSpinning starts late or the machinedoes not spin:The electronic unbalance detection device has cut in because the laund

Consumption valuesProgramme Energy consumption(KWh)Water consumption (litres) Programme duration (Mi-nutes)White Cottons 90° 2,2 65For the duration of

Replace the drawer and run the rinse programme with-out any clothes in the drum.Cleaning the pumpThe pump should be inspected if:• the machine does no

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Control panel _ _ _ _ _ _ _ _ _ _ _

• Unscrew the hose from the machine. Keep a rugnearby because some water may flow.• Clean the filter in the valve with a stiff brush or withthe piece

Unscrew the three bolts. Slide out the relevant plas-tic spacers.Open the porthole and re-move the polystyreneblock fitted on the doorseal.Fill the sm

Warning! Installation should comply with localwater authority and building regulations’requirements.The appliance must be connected to a cold water s

protrude a few centimetres beyond the edges of the ap-pliance.Warning! The appliance should NOT be placed ondeep pile carpeting.Note!Please ensure th

for the required load in compliance with the current elec-trical regulations.The switch must not break the yellow and green earthcable at any point.En

25

26

27

www.zanussi.com192994970 - 00 - 232009

• Always be sure, that there is no water leakage fromhoses and their connections after the installation.• If the appliance is installed in a location

Product description1 Detergent dispenser drawer2 Control panel3 Door opening handle4 Rating plate5 Drain pump6 Adjustable feet1 23456Detergent dispens

1 2 3 4 5 6 7 81 Programme selector dial2 SPIN reduction button3 OPTIONS button4 EXTRA RINSE button5 Display6 START/PAUSE button7 DELAY START button8

Super QuickShort cycle for lightly soiled items or for laundry whichneeds only freshening up. We recommend you to reducethe fabrics loading.Extra Rins

• Heating phaseDuring the washing cycle the display shows a temper-ature icon to indicate that the appliance has started theheating phase of the water

Pull out the dispenser drawer until it stops. Measureout the amount of detergent required, pour it into themain wash compartment or in the appropriat

Altering an option or a running programmeIt is possible to change some options before the pro-gramme carries them out.Before you make any change, you