Zanussi ZWG5140P User Manual download pdf (Page 17)

Start/Pause

ezu

P/tra

esuaP/trapéD

Start the programme by pressing the button 6

• To start the selected programme, press the button 6, the

corresponding green pilot light stops flashing. The pilot light

7.1 illuminates to indicate that the appliance starts operat-

ing and the door is locked. If you have chosen a delayed

start, the appliance will begin the countdown.

• To interrupt a programme which is running, press the but-

ton 6: the corresponding green pilot light starts flashing. It

is possible to change some options of a running pro-

gramme before the programme carries them out.

• To restart the programme from the point at which it was in-

terrupted, press the button 6.

• After the programme has started the door is locked. If, for

any reason, you need to open the door, set firstly the ap-

pliance to PAUSE by pressing the button 6. After a few mi-

nutes it will be possible to open the door.

If the door remains locked, this means that the appliance is

already heating or that the water level is too high. In any

case, do not try to force the door!

If you cannot open the door but you need to open it you

have to switch the appliance off by turning the selector dial

. After a few minutes the door can be opened (pay

attention to the water level and temperature!). After

closing the door, it is necessary to select the programme

and options again and to press the button 6.

7.1

7.2

7.3

Indicator pilot lights

Einde

Fin

Extra spoelen

Rinçage plus

Hoofdwas

Lavage

• When you start the programme by pressing the button 6,

the washing phase pilot light (7.1) illuminates. This means

that the appliance is operating.

• The additional rinses pilot light (7.2) illuminates when the

appliance performs an extra rinse.

• When the programme has finished the end cycle pilot light

(7.3) comes on.

At the end of the programme

The appliance stops automatically. The pilot

light of the button 6 and the pilot light corre-

sponding to the just finished washing phase go

off. The light 7.3 illuminates.

If a programme or an option that ends with wa-

ter left in the tub has been selected and the

door remains locked to indicate that the water

must be emptied out before opening the door.

Follow the below instructions to empty out the

water:

•

Turn the programme selector dial to

• Select the draining or spinning programme.

• Reduce the spin speed if needed, by press-

ing the relevant button.

• Press the button 6.

At the end of the programme, the door can be

now opened. Turn the programme selector dial

to switch the appliance off.

Remove the laundry from the drum and carefully

check that the drum is empty. If you do not in-

tend to carry out another wash, close the water

www.zanussi.com

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Comments to this Manuals

No comments

Zanussi ZWG5140P User Manual Page 17

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWG5140P