Zanussi ZWGB7160P User Manual download pdf (Page 20)

Start /Pause

Start the programme by pressing the button 9

• To start the selected programme, press the button 9, the

corresponding green pilot light stops flashing. The pilot light

10 illuminates to indicate that the appliance starts operating

and the door is locked. If you have chosen a delayed start,

the appliance will begin the countdown.

• To interrupt a programme which is running, press the but-

ton 9: the corresponding green pilot light starts flashing. It is

possible to change some options of a running programme

before the programme carries them out.

• To restart the programme from the point at which it was in-

terrupted, press the button 9.

• After the programme has started the door is locked. If, for

any reason, you need to open the door, set firstly the appli-

ance to PAUSE by pressing the button 9. After a few mi-

nutes it will be possible to open the door.

If the door remains locked, this means that the appliance is

already heating or that the water level is too high. In any

case, do not try to force the door!

If you cannot open the door but you need to open it you

have to switch the appliance off by turning the selector dial

. After a few minutes the door can be opened (pay at-

tention to the water level and temperature!). After

closing the door, it is necessary to select the programme

and options again and to press the button 9.

The pilot light 10 illuminates when the programme starts and

indicates if the door can be opened:

• light on: the door cannot be opened. The appliance is work-

ing or has stopped with water left in the tub.

• light off: the door can be opened. The programme is finished

or the water has been emptied out.

• light blinking: the door is opening in a few minutes.

At the end of the programme

The appliance stops automatically. The pilot

light of the button 9 and the pilot light 10 go off.

The display shows

If a programme or an option that ends with wa-

ter left in the tub has been selected, the pilot

light 10 remains on and the door is locked to in-

dicate that the water must be emptied out be-

fore opening the door.

Follow the below instructions to empty out the

water:

•

Turn the programme selector dial to

• Select the draining or spinning programme.

• Reduce the spin speed if needed, by press-

ing the relevant button.

• Press the button 9.

At the end of the programme, the door can be

now opened. Turn the programme selector dial

to switch the appliance off. Remove the

laundry from the drum and carefully check that

the drum is empty. If you do not intend to carry

out another wash, close the water tap. Leave

the door open to prevent the formation of mil-

dew and unpleasant smells.

www.zanussi.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comments to this Manuals

No comments

Zanussi ZWGB7160P User Manual Page 20

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWGB7160P