Zanussi ZWI71000WA User Manual download pdf (Page 13)

When selecting a programme, the light corre-

sponding to the maximum speed allowed for

that programme will illuminate.

Select the available options by pressing

buttons 3 and 4

Depending on the programme, different func-

tions can be combined. These must be selec-

ted after choosing the desired programme and

before starting the programme.

When these buttons are pressed, the corre-

sponding pilot lights illuminate. When they are

pressed again, the pilot lights go out. If an in-

correct option is selected, the integrated red

pilot light of the button 5 flashes for 3 times.

For the compatibility among the washing

programmes and the options see chapter

«Washing Programmes».

Select the Delay Start by pressing button

6

Before you start the programme, if you wish to

delay the start, press the button 6 repeatedly,

to select the desired delay. The relevant light il-

luminates.

You must select this option after you have set

the programme and before you start the pro-

gramme.

You can cancel or modify the delay time at any

moment, before you press button 5.

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the but-

ton 6.

3. Press button 5:

– the machine starts its hourly countdown.

– The programme will start after the selec-

ted delay has expired.

Cancelling the delayed start after having star-

ted the programme:

1. Set the washing machine to PAUSE by

pressing button 5.

2. Press button 6 once, the light relevant to

the selected delay goes off

3. Press button 5 again to start the pro-

gramme.

The Delay Start can not be selected with

DRAIN programme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The door will be locked throughout the delay

time. If you need to open the door, you must set

the machine to PAUSE (by pressing the button

5) and then wait a few minutes. After you have

closed the door, press the button 5 again.

Start the programme by pressing button 5

To start the selected programme, press the

button 5, the corresponding green pilot light

stops blinking. The pilot light corresponding to

the running phase illuminates. The appliance

starts operating and the door is locked.

To interrupt a programme which is running,

press the button 5: the corresponding green pi-

lot light starts blinking.

To restart the programme from the point at

which it was interrupted, press the button 5

again. If you have chosen a delayed start, the

machine will begin the countdown.

If an incorrect option is selected, the red pilot

light of the button 5 blinks 3 times.

Interrupting a programme

Press the button 5 to interrupt a programme

which is running, the corresponding green pilot

light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to

to cancel a pro-

gramme which is running. Now you can select a

new programme.

Opening the door

After the programme has started the door is

locked. If, for any reason, you need to open it,

set firstly the machine to PAUSE by pressing

the button 5. After a few minutes it will be pos-

sible to open the door.

If the door remains locked, this means that the

machine is already heating or that the water lev-

el is too high. In any case, do not try to force

the door!

13

www.zanussi.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments