Zanussi ZCG64396XA User Manual download pdf (Page 25)

WARNING! Put the mains plug

into the mains socket only if all

parts are back into their initial

position. There is a risk of injury.

4. Light the burner.

Refer to "Oven - Daily use" chapter.

5. Turn the knob for the oven functions on the

minimum position.

6. Remove the knob for the oven functions again.

7. Screw on slowly the bypass screw till the flame

becomes minimum and stable.

8. Put the knob for the oven functions back.

9. Set the maximum gas flow position on the knob

for the oven functions and let the oven heat for

at least 10 minutes.

10. Quickly turn the knob for the oven functions

from maximum to the minimum gas flow

position.

Control the flame. Make sure the flame does not go

out when you turn the knob to the minimum gas

flow position. There must be a small regular flame

on the oven burner crown. If the flame goes out

adjust the oven burner again.

GAS GRILL INJECTOR REPLACEMENT

1. Release the screws which keep the grill burner

in position A.

2. Release the burner injector with a 7 mm socket

spanner and replace it with a right one.

3. Assemble the burner in a reverse sequence.

Before you fix the screw, make sure that the

burner is pushed correctly to the back panel.

Test the grill injectors.

LEVELLING

CAUTION! Remove all the

accessories from the oven.

1. Open the lid of the appliance and disassemble

it.

2. Disassemble the pan supports and all the

burner assemblies.

3. Put the appliance on the sidewall on a clean

and smooth surface. Place each foot into a

separate hole, in the plinth, and rotate it

clockwise.

4. If the floor is not equally flat, use the adjustable

feet on the bottom of the appliance to set a

stable position for the appliance.

1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Zanussi ZCG64396XA User Manual Page 25

Comments to this Manuals

Related products and manuals for Hobs Zanussi ZCG64396XA