Zanussi ZI922/10A User Manual download pdf (Page 13)

20 mm

50mm

PR166

Appoggiare la guida (A) sulla parte interna della

porta del mobile sopra e sotto come indicato in

figura e segnare la posizione dei fori esterni. Dopo

aver preparato i fori fissare la guida con le viti in

dotazione.

PR33

Inserire a scatto il coperchietto (C) sulla guida (A)

PR167/1

Inserire a scatto il coperchietto (D) sulla guida (B)

Aprire la porta dellÕapparecchiatura e quella del

mobile a 90¡ ca. Inserire la squadretta (B) nella

guida (A). Tenere insieme la porta dellÕapparecchia-

tura e quella del mobile e segnare i fori come

indicato in figura.

Togliere le squadrette e fare dei fori di ¯ 2 mm a 8

mm dal bordo esterno della porta. Posizionare

nuovamente la squadretta sopra le guida e fissare

con le viti in dotazione.

8mm

PR167

PR168

Per lÕeventuale operazione di allineamento della

porta del mobile, utilizzare il gioco dei fori asolati.

Al termine delle operazioni • necessario controllare

lÕesatta chiusura della porta dellÕapparecchiatura.

CONTENTS

Warnings 15

Use 17

Cleaning the interior 17

Operation 17

Temperature regulation 17

Freezing fresh food 18

Storage of frozen food 18

Thawing 18

Ice-cube production 18

Fresh food refrigeration 19

Movable shelves 19

Positioning the door shelves 19

Hints 20

hints for refrigeration 20

Hints for freezing 20

Hints for storage of frozen food 20

Maintenance 21

Periodic cleaning 21

Periods of no operation 21

Interior light 21

Defrosting 21

Customer service and spare parts 22

Technical information 23

Installation 23

Location 23

Electrical connection 23

Changing the opening direction of the doors 24

Instructions for totally built-in 24

metal objects for cleaning your appliance as it

may get damaged.

Installation

¥ During normal operation, the condenser and

compressor at the back of the appliance heat up

considerably. For safety reasons, minimum

ventilation must be as shown in the instructions.

Attention: keep ventilation openings clear of

obstruction.

¥ Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Important: if the supply cord is damaged, it must

be replaced by a special cord or assembly availa-

ble from the manufacturer or its service agent.

¥ If the appliance is transported horizontally, it is

possible that the oil contained in the compressor

flows in the refrigerant circuit. It is advisable to

wait at least two hours before connecting the

appliance to allow the oil to flow back in the

compressor.

¥ There are working parts in this product which

heat up. Always ensure that there is adequate

ventilation as a failure to do this will result in

component failure and possible food loss. See

installation instructions.

¥ Parts which heat up should not be exposed.

Wherever possible the back of the product

should be against a wall.

Environment Protection

This appliance does not contain gasses which

could damage the ozone layer, in either its

refrigerant circuit or insulation materials. The

appliance shall not be discarded together with

the urban refuse and rubbish. Avoid damaging

the cooling unit, especially at the rear near the

heat exchanger. Information on your local

disposal sites may be obtained from municipal

authorities. The materials used on this appliance

marked by the symbol are recyclable.

1 2 ... 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Zanussi ZI922/10A User Manual Page 13

Comments to this Manuals

Related products and manuals for Combi-fridges Zanussi ZI922/10A