ENUser manualGas hobZGG96624GB
Warning! Pots must not enter the controlzone. Flame will heat up the control zone.Do not put the same pan on two burners.Warning! Make sure pot handle
water rings, fat stains, shiny metallic dis-colorations. Use a special cleaner appli-cable for surface of hob.2. Clean the appliance with a damp cloth
If there is a fault, first try to find a solution to theproblem yourself. If you cannot find a solution tothe problem yourself, speak your dealer or t
Electric supply: 230 V ~ 50 Hzsupply, 3 core flexiblecable withnon rewireable plug fit-ted with a 3 amp car-tridge fuseCategory: II2H3+Gas connection:
14 www.zanussi.com
15www.zanussi.com
www.zanussi.com/shop 397226401-A-072012
ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Product description _ _ _ _ _ _ _ _ _ _
and that it is centrally positioned on the ringsin order to avoid safety risks.• Do not use unstable cookware or cookwarewith damaged bottom. There is
• Disconnect the appliance from the elec-trical supply, before you do the mainte-nance work or you clean it.• The electrical mains terminal is live.•
edges of the hob is 400 mm. If it is fitted below400 mm a space of 50 mm must be allowedfrom the edges of the hob.For appliances installed in the Repu
4. With a thin screwdriver, adjust the by-passscrew position.11The by-pass screw– If you change from natural gas G20 20mbar to liquid gas, fully tight
1 23451Green and Yellow23 amp fuse3Brown4Cord clamp5BlueShould the plug need to be replaced for anyreason, the wires in the mains lead are colouredin
min 20 mm(max 150 mm)30 mm60 mmbaa) Removable panelb) Space for connectionsKitchen unit with ovenThe hob recess dimensions must obey the indi-cation a
If after some tries the burner does notlight, check if the crown and its cap are incorrect positions.342112341Burner cap2Burner crown3Ignition candle4
Comments to this Manuals