Zanussi ZDE47100W User Manual download pdf (Page 8)

Selecting the programme

Use the programme selector to set the programme you

require.

Selecting additional functions

You can choose from the additional functions (only with

time programmes ) :

button 1 -DELICATE

button 2 -TEXTILE

DELICATE

Pressing this button allows drying to be performed at a

lower temperature, for delicate items. The corresponding

pilot light comes on. This option can also be used for time

controlled drying.

TEXTILE

Press the Textile button repeatedly, to select the desired

option. The relevant light will light up. You can select 2

different options: COTTON cycle: to be used for cotton,

and SYNTHETICS : to be used for synthetic or delicate

items.

Starting the programme

Press the START PAUSE button. The programme is star-

ted.

1 2 3

5 467

The programme phase is shown by appropriate lights;

light 5- DRYING , light 6- COOLING, light7- END/ANTI-

CREASE .

Changing programme

To change a programme which has been selected by mis-

take once the programme has started, first turn the pro-

gramme selector to OFF position. The programme is

cancelled.

The programme can no longer be changed directly

once the programme has started. If nevertheless

there is an attempt to change the programme on the pro-

gramme knob or if an function button is pressed, led

START PAUSE starts flashing temporarily in yellow. The

drying programme is not however affected by this (laundry

protection).

Drying cycle complete / removing laundry

Once the drying cycle is complete, the lights END/ANTI-

CREASE and FILTER (light 4) are on. If the buzzer function

is active, an acoustic signal will sounds intermittently for

about one minute.

The drying cycles are automatically followed by an

anti-crease phase which lasts around 30 minutes.

The drum rotates at intervals during this phase. This keeps

the laundry loose and free of creases. The laundry can be

removed at any time during the anti-crease phase. (The

laundry should be taken out towards the end of the anti-

crease phase at the latest to prevent creases from form-

ing.)

1. Open door.

2. Remove laundry.

3. Remove filter after clothes has been removed. Clean

the filter.

Warning! Before You place the filter, please check

it there is nothing inside the filter seat.

4. Turn the programme selector to OFF .

Important! Clean the filter after each drying cycle.

5. Close the door.

Cleaning and maintenance

Warning! The tumble dryer is not to be used if

industrial chemicals have been used for cleaning!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Zanussi ZDE47100W User Manual Page 8

Comments to this Manuals

Related products and manuals for Tumble dryers Zanussi ZDE47100W