Zanussi ZWG1120M User Manual download pdf (Page 11)

Load the laundry

Measure out the detergent and the fabric softener

Select the required programme by means of the

programme selector dial (3)

Important!

Select the spin speed by pressing button 7

Select the available options by pressing buttons 2

Open the door by

carefully pulling the door

handle outwards. Place

the laundry in the drum,

one item at a time,

shaking them out as much

as possible. Close the

door.

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent required, pour it into the

main wash compartment or in the appropriate

compartment if the selected programme/option it

requires (see more details in «Detergent dispenser

drawer»).

If required, pour fabric softener into the compartment

marked (the amount used must not exceed the

«MAX» mark in the drawer). Close the drawer gently.

Turn the programme selector dial to the required

programme.

The selector dial can be turned either clockwise or

anticlockwise.

Turn the selector dial to position to reset the

programme or to switch the machine off.

At the end of the programme the selector dial must be

turned to position , to switch the machine off.

If you turn the programme selector dial to

another programme when the machine is working, the

machine will not perform the new selected

programme.

When selecting a programme, the appliance

proposes automatically a suggested spin speed for

that programme. (See «Washing programmes» for

the maximum allowed spin speed).

Press this button repeatedly to change the spin

speed, if you want your laundry to be spun at a

different speed. The relevant pilot light illuminates.

Daily Use

With this button you can select an additional Prewash

or an additional Rinse or both.

When this button is pressed, the corresponding pilot

light illuminates. When it is pressed again, the pilot

light goes out.

To start the selected programme, press this button.

The icon illuminates to indicate that the appliance

starts operating and the door is locked.

If you have chosen a delayed start, the machine will

begin the countdown.

Before you start the programme, if you wish to delay

the start, press this button to select the desired delay.

The selected delay time value will appear on the

display for a few seconds, then the duration of the

programme will appear again. By pressing this button,

the washing programme can be delayed by 1 hour up

to a maximum of 24 hours.

You must select this option after you have set the

programme and before you start the programme.

You can cancel or modify the delay time at any

moment, before you press button 4.

Selecting the delay start:

1. Select the programme and the required options.

2. Select the delay start by pressing button 6.

3. Press button 4:

- the machine starts its hourly countdown.

- the programme will start after the selected delay

has expired.

Start the programme by pressing button 4

Select the Delay Start by pressing button 6

ZANUSSI

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Zanussi ZWG1120M User Manual Page 11

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWG1120M