Zanussi ZWI71000WA User Manual download pdf (Page 19)

could be done by tying it to the tap with a piece

of string or attaching it to the wall.

• In a sink drain pipe branch.

This branch must be above the trap so that the

bend is at least 60 cm above the ground.

• Directly into a drain pipe at a height of not

less than 60 cm and not more than 90 cm.

The end of the drain hose must always be

ventilated, i.e. the inside diameter of the

drainpipe must be larger than the outside

diameter of the drain hose. The drain hose must

not be kinked.

The drain hose may be extended to a maximum of 4

metres. An additional drain hose and joining piece

is available from your local Service Centre

BUILDING IN

OVERVIEW

This appliance has been designed to be built into

the kitchen furniture. The recess should have the

dimensions shown in the picture below:

600 mm

555 mm

596 mm

170 mm

75 mm

100 mm

60 mm

min.

820 mm

min.

560 mm

818 mm

We recommend that you keep the

packaging and the transit bolts for any

movement of the appliance.

PREPARATION AND ASSEMBLY OF THE

DOOR

The appliance is originally prearranged for the

assembly of a door opening from right to left (see

picture below)

Door

• - width 595-598 mm

• - thickness 16-22 mm

The height X depends on the height of the adjacent

furniture's base.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Comments to this Manuals

No comments

Zanussi ZWI71000WA User Manual Page 19

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWI71000WA