Zanussi ZWO1101 User Manual download pdf (Page 18)

Positioning and levelling

• Install the appliance on a flat hard floor.

• Make sure that carpets do not stop the air circulation

below the appliance.

• Make sure that the appliance does not touch the wall

or other units

• Loosen or tighten the feet to adjust the level. A cor-

rect adjustment of the appliance level prevents the

vibration, noise and the movement of the appliance

when in operation.

• The appliance must be level and stable.

Caution! Do not put cardboard, wood or equivalent

materials below the appliance feet to adjust the

level.

The inlet hose

• Connect the hose to the appliance. Loose the ring

nut to set it in the correct position.

• Connect the water inlet

hose to the cold water

tap with 3/4 thread.

Caution! Make sure that there are no leaks from the

couplings.

Do not use an extension hose if the inlet hose is too

short. Contact the service centre for the replacement

of the inlet hose.

Water drainage

There are different procedures to connect the drain hose:

With the plastic hose guide

1 2 ... 13 14 15 16 17 18 19 20

No comments

Zanussi ZWO1101 User Manual Page 18