Zanussi ZWY180 Basic Guide Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
Dispenser box
1
2
3
4
5
1.
Softener (do not fill above the MAX symbol
M
)
2.
Bleaching agent can be used on Cotton pro-
grammes without prewash - 1/4 to 1 glass of dilu-
ted bleach (do not fill above the MAX symbol)
3.
Wash
4.
Prewash
5. Fabric softener and bleach overflow (if overfilled)
Safety Information
Please read these points carefully before installing and
using your appliance. Keep this user manual with your
appliance.
General safety
Do not modify or attempt to modify this appliance.
This would put yourself in danger.
Ensure that all coins, safety pins, brooches, screws
etc have been removed before starting a washing pro-
gramme. If left in washing, they can seriously dam-
age the appliance.
Use the recommended quantity of detergent.
Put small items together (socks, belts etc.) in a small
linen bag or pillow case.
Unplug and close inlet hose tap after using appliance.
Always disconnect the power supply from the appli-
ance before cleaning or maintenance.
Do not machine wash clothes with ribbing, unfinish-
ed or torn material.
Installation
Unpack or ask for the appliance to be unpacked im-
mediately upon delivery. Check the outside of the ap-
pliance is not damaged in any way. Report all transit
damage to your retailer.
Remove all transit bolts and packaging before instal-
ling the appliance.
Connection to the water supply must be carried out
by a qualified plumber.
If your domestic electrical circuit needs adapting to
allow the appliance to be plugged in, use a qualified
electrician.
Ensure that, after installation, the power cable is not
trapped under the appliance.
If the appliance is installed on carpeted floor, ensure
that the carpet does not obstruct any ventilation
ducts located at the base of the appliance.
The appliance must be equipped with an earthed pow-
er plug which conforms to regulations.
Before connecting your appliance to the power sup-
ply, carefully read the instructions in the chapter enti-
tled “Electrical connection”.
Replacing the power cable should only be carried out
by an authorised service engineer.
The manufacturer cannot be held responsible for any
damage resulting from incorrect installation.
Precautions to be taken against frost
If your appliance is exposed to temperatures below 0°C,
the following precautions must be taken:
Close the tap and disconnect the inlet hose.
Place the end of this hose and the drain hose in a
basin on the floor.
Select the Drain programme let it run until the end of
the cycle.
Disconnect the appliance from the power supply by
turning the programme selector to “Stop”
.
Unplug the appliance.
3
Page view 2
1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments