Zanussi ZWY180 Basic Guide download pdf (Page 5)

for Cotton, Eco : 1200 rpm (ZWY1120), 1000 rpm

(ZWY1100), 800 rpm (ZWY180), for Wool, Handwash :

1000 rpm (ZWY1100), 900 rpm (ZWY1120), 800 rpm

(ZWY180), for Synthetics : 900 rpm (ZWY1120), 800

rpm (ZWY180/1100), for Delicates : 700 rpm.

At the end of the programme, if you have selected

“Rinse hold”

or “Night cycle plus”, you then need to

select a “Spin”

or “Drain” programme to finish

the cycle and empty the water.

Selecting options

You must select the different options after selecting the

programme and before pressing the “ Start/Pause ” push-

button (see “Programmes table”). Press the desired but-

ton(s) : the corresponding lights come on. If pressed

again, the lights go out. If one of the options is not com-

patible with the selected programme, the “ Start/Pause ”

pushbutton flashes red.

“Prewash” option

The appliance runs a prewash at 30°C max.

“Super quick” option

The washing time will be reduced depending on the pro-

gramme selected.

“Rinse plus” option

The washing machine will add one or more rinses dur-

ing the cycle. This option is recommended for people

with sensitive skin and in soft water areas.

Temporary : Press the “Rinse plus”

pushbutton. The

option is only active for the selected programme.

Permanent : Hold down the “Options”

and “Rinse

plus”

pushbuttons for a few seconds. The option is

permanently activated, even if the appliance is switched

off. To deactivate it, repeat the process.

Start of the programme

Press the “ Start/Pause ” pushbutton to start the cycle.

The corresponding light will come on green.

It is normal for the programme selector to remain sta-

tionary during the cycle. The light corresponding to the

current cycle is illuminated.

Interrupting a programme

Adding washing during the first 10 minutes

Press the “ Start/Pause ” pushbutton : the correspond-

ing light will flash green while the appliance is paused.

The lid can only be opened around 2 minutes after the

washing machine has come to a stop. Press the “ Start/

Pause ” pushbutton again to continue the programme.

Modifying the programme in progress

Before making any changes to the current programme,

you need to pause the washing machine by pressing the

“ Start/Pause ” pushbutton. If the modification is not pos-

sible, the “ Start/Pause ” pushbutton flashes red for a

few seconds. If you still decide to change the pro-

gramme, you must cancel the current programme (see

below).

Cancelling the programme

If you want to cancel the programme, turn the pro-

gramme selector to the “ Stop ” position

End of the programme

The washing machine stops automatically, the “ Start/

Pause ” pushbutton goes out and the light “ End of cy-

cle ” comes on. The lid can only be opened around 2

minutes after the washing machine has come to a stop.

Turn the programme selector to the “ Stop ” position

. Remove washing. Unplug and close water inlet tap.

Programmes table

Programme / Type of washing Load Possible options

Cotton (cold - 90°) : White or colour, e.g. nor-

mally soiled work clothes, bed linen, table linen,

body linen, towels.

5,0 kg Prewash, Super quick, Rinse plus, Rinse

hold

Eco

(40° - 60°) : White or colour, e.g. normal-

ly soiled work clothes, bed linen, table linen, body

linen, towels.

5,0 kg Prewash, Rinse plus, Rinse hold

Synthetics (cold - 60°) : Synthetic fabrics, body

linen,fab, coloured farics, non-iron shirts, blouses.

2,5 kg Prewash, Super quick, Rinse plus, Rinse

hold

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments

Zanussi ZWY180 Basic Guide Page 5

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWY180