Zanussi ZWY180 Basic Guide Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Installation
Remove all protective packaging for transit before using
for the first time. Keep in case needed for future transit:
Transporting a non-secured appliance may damage in-
ternal components and cause leakages and malfunc-
tions. The appliance can also be damaged through phys-
ical contact.
Unpacking
1
2
3
5
6
4
Untying
1
2
3
4
1
2
3
4
To install your washing machine at the same level as sur-
rounding furniture, proceed as shown on picture 4.
Water supply
21 3
In case of necessity move the inlet hose in the direction
shown on picture no. 1. To make this loose the inlet
hose ring nut and position the inlet hose downwards as
drawn on picture no. 1. Tighten the ring nut back and
make sure there are no leaks. Open the water inlet tap.
Check there are no leaks. The water inlet hose can not
be extended. If it is too short, please contact the after-
sales service.
Drainage
The connector at the end of the flexible hose can be at-
tached to all common types of standpipe. Attach the con-
nector to the standpipe with the hose clamp supplied
with the appliance
2)
Fit the U-piece on the drainage hose. Place everything
in a drainage point (or in a sink) at a height of between
70 and 100 cm. Ensure it is positioned securely. Air
must be able to enter the end of the hose, to avoid any
risk of siphoning.
Warning!
The drain hose must never be stretched. If it is too
short, contact an engineer.
Electrical connection
This washing machine must only be connected in single-
phased 230 V. Check the fuse size: 13 A for 230 V. The
appliance must not be connected with an extension lead
or multi-plug adaptor. Ensure that the plug is earthed
and that it is in accordance with current regulations.
Positioning
Position the appliance on a
flat and hard surface in a
ventilated location. Ensure
the appliance does not
come into contact with the
wall or other furniture.
Accurate levelling avoids vibrations, noise and prevents
the appliance from moving when running.
2) depending on the model
9
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments