Zanussi ZDT 6244 Instruction Booklet download pdf (Page 14)

In this fully integrated appliance the controls are located on the

top of the door. When selecting a programme, the door needs

to be open.

1. Check that the baskets have been

loaded correctly and that the spray

arms can rotate freely

2. Turn on the water tap

3. Press the On/Off push button

All the indicator lights of the programme selection push

buttons illuminate (setting mode).

4. Setting and starting the programme

To select a programme, press the programme push button

of the washing programme you wish to select (see

"Washing programmes" chart).

The corresponding indicator light remains illuminated while

the other programme push buttons indicator lights turn off.

The start of the programme will occur only after the

closure of the door, until this moment you can modify the

selection made.

Close the dishwasher door, the programme will start

automatically.

5. To interrupt or cancel a washing

programme in progress

Interrupt or cancel a washing programme in progress

ONLY if it’s absolutely necessary

Attention! Hot steam may escape when the door is

opened. Open the door carefully.

Interrupt a washing programme in progress

Open the dishwasher door; the programme will stop.

Close the door; the programme will start from the point in

which it was interrupted.

Cancel a washing programme in progress

Open the dishwasher door.

Press simultaneously the function push buttons 2 and 3

for about 2 seconds, the indicator light of the push button

corresponding to the running programme starts flashing for

about 2 seconds.

After about 2 seconds the indicator lights of all the

programme push buttons will illuminate indicating that the

running programme has been cancelled and that the

machine has returned to setting mode.

(If a new washing programme will be selected, check that

there is detergent in the detergent dispenser).

6. End of the washing programme

The dishwasher will automatically stop and an audible

signal informs you of the end of the washing programme.

Hot steam may escape from the appliance when opening

the door immediately after the end of the programme,

therefore, open the door carefully.

The end of programme indicator light is illuminated.

The indicator light of the programme just ended remains

on.

Switch off the dishwasher by pressing the On/Off push

button.

7. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should

therefore be allowed to cool down before removing from

the appliance.

Empty the lower basket first and then the upper one; this

will avoid water dripping from the upper basket onto the

dishes in the lower one.

Water may appear on the sides and the door of the

dishwasher as the stainless steel will eventually become

cooler than the dishes.

When the washing programme has finished, it is

recommended that the dishwasher is unplugged and the

water tap turned off.

Starting a washing programme

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 24 25

Comments to this Manuals

No comments

Zanussi ZDT 6244 Instruction Booklet Page 14

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDT 6244