Zanussi ZDT 6244 Instruction Booklet download pdf (Page 21)

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this

safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the

socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with

the following code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

If you fit your own plug, the colours of the wires in the mains

lead of your appliance may not correspond with the markings

identifying the terminals in your plug.

Proceed as follows:

1. Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2. Connect the Blue (neutral) wire to the terminal in the plug

which is marked with the letter "N" or coloured black.

3. Connect the Brown (live) wire to the terminal in the plug

which is marked with the letter "L" or coloured red.

The plug moulded onto the lead incorporates a 13amp BSI362

fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The

cover/carrier is indicated by the coloured insert at the base of

the plug.

A replacement cover/carrier must be obtained from your local

Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance

has been installed.

The appliance should not be connected to the

electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced,

please contact your local Service Force Centre.

13A

CE04

1 2 ... 16 17 18 19 20 21 22 23 24 25

No comments

Zanussi ZDT 6244 Instruction Booklet Page 21