Zanussi ZDT311 User Manual download pdf (Page 33)

• Do not put the water inlet hose or the safety valve in

water.

• If the water inlet hose or the safety valve is damaged,

immediately disconnect the mains plug from the mains

socket.

• Only let the Service Force Centre replace the water inlet

hose with safety valve.

Drain hose

Connect the water drain

hose to the sink spigot.

max 85 cm

min 40 cm

max 400 cm

The internal diameter must not be smaller than the diam-

eter of the hose.

If you connect the water drain hose to a trap spigot under

the sink, remove the plastic membrane (A). If you do not

remove the membrane, remaining food can cause a block-

age in the drain hose spigot.

Caution! Make sure that the water couplings are

tight to prevent water leakage.

Electrical connection

Warning! The manufacturer is not responsible if

you do not follow these safety precautions.

Ground the appliance according to safety precautions.

Make sure that the rated voltage and type of power on the

rating plate agree with the voltage and the power of the

local power supply.

Always use a correctly installed shockproof socket.

Do not use multi-way plugs, connectors and extension

cables. There is a risk of fire.

Do not replace the mains cable yourself. Contact the

Service Force Centre.

Make sure that the mains plug is accessible after

installation.

Do not pull the mains cable to disconnect the appliance.

Always pull the mains plug.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 87 88

No comments

Zanussi ZDT311 User Manual Page 33