Zanussi FL12INPUT User Manual download pdf (Page 12)

11. Start the programme

To start the selected programme, press the

START/PAUSE button; the display stops flashing and

the door pilot light comes on to indicate that the door

locking device is engaged.

The programme starts after about 30 seconds.

12. Store the programme

The wash programme selected can now be stored by

pressing one of the MEMORY buttons until the

corresponding pilot light comes on.

13. At the end of the programme

The machine stops automatically and three flashing

zeros are displayed.

The programme which has just been completed is still in

the memory and the corresponding pilot lights stay on.

If the RINSE HOLD option has been selected, the

corresponding pilot light flashes to indicate that the

water must be emptied out before opening the door.

The machine is fitted with a safety device that prevents

opening of the door for about 2-3 minutes after the end

of the programme. The door can only be opened after

the door locked indicator light has gone out.

Release of the lock is indicated by an audible signal as

well as the pilot light going out.

Switch the machine off by pressing the ON/OFF button.

Remove the laundry from the drum and carefully check

that the drum is empty to avoid any forgotten items

being damaged in a subsequent wash e.g. shrinking or

colour running.

If you do not intend to carry out another wash, close the

water tap.

Leave the door open to prevent the formation of mildew

and unpleasant smells.

MEMORY

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Zanussi FL12INPUT User Manual Page 12