Zanussi ZKC44500XA User Manual download pdf (Page 4)

• The appliance should be cleaned regularly and any food deposits

removed.

• Failure to maintain the appliance in a clean condition could lead to

deterioration of the surface that could adversely affect the life of

the appliance and possibly result in a hazardous situation.

• Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the glass door since they can scratch the surface, which

may result in shattering of the glass.

• To remove the shelf supports first pull the front of the shelf support

and then the rear end away from the side walls. Install the shelf

supports in the opposite sequence.

• Ensure that the appliance is switched off before replacing the

lamp to avoid the possibility of electric shock.

Safety instructions

Installation

Warning! Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied with

the appliance.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety

gloves.

• Do not pull the appliance by the handle.

• Keep the minimum distance from the other

appliances and units.

• Make sure that the appliance is installed be-

low and adjacent safe structures.

• The sides of the appliance must stay adjacent

to appliances or to units with the same

height.

Electrical connection

Warning! Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power supply.

If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Contact the

Service or an electrician to change a dam-

aged mains cable.

• Do not let mains cables to come in touch with

the appliance door, specially when the door is

hot.

• The shock protection of live and insulated

parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• If the mains socket is loose, do not connect

the mains plug.

www.zanussi.com

1 2 3 4 5 6 7 8 9 ... 35 36

Comments to this Manuals

No comments

Zanussi ZKC44500XA User Manual Page 4

Comments to this Manuals

Related products and manuals for Microwaves Zanussi ZKC44500XA