Zanussi ZWD14791W User Manual download pdf (Page 29)

3 pin

Min. 60 cm (23.6”)

Min. 90 cm (35.4”)

The drain hose may be extended to a maximum of 4 me-

tres. An additional drain hose and joining piece is availa-

ble from your local Service Force Centre. The joining

piece must have an internal diameter of 18 mm.

If your drain hose looks like this (see below) you do not

require the “U” piece”. Just push the hose firmly in to the

standpipe.

2. Onto a sink outlet spigot.

If the outlet spigot has not been used before, remove any

blanking plug that may be in place.

Push the drain hose onto the spigot and secure with a

clip, ensure a loop is formed in the drain hose (see dia-

gram) to prevent waste from the sink entering the appli-

ance.

If you intend to drain the hose from the machine into a

sink, make sure that the sink is empty and the plug hole is

not blocked.

Use the plastic “U - Piece” supplied.

www.zanussi.com

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Zanussi ZWD14791W User Manual Page 29