Zanussi ZWI71000WA User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
5) A single or bulky item may cause imbalance. If the appliance doesn’t perform the final spin phase, add more
items, redistribute the load manually and then select the spinning programme.
Consumption values
The data of this table are approximate. Different causes can change the data: the quantity and
type of laundry, the water and ambient temperature.
Programmes Load
(kg)
Energy con-
sumption
(kWh)
Water con-
sumption (litre)
Approximate
programme du-
ration (mi-
nutes)
Remaining
moisture
(%)
1)
Cottons 60 °C 7 1.35 67 150 52
Cottons 40 °C 7 0.85 67 140 52
Synthetics 40 °C 3 0.55 42 90 37
Delicates 40 °C 3 0.55 63 65 37
Wool/Hand wash
30 °C
2 0.25 55 60 32
Standard cotton programmes
Standard 60 °C
cotton
7 1.01
52
180 52
Standard 60 °C
cotton
3.5 0.78 44 149 52
Standard 40 °C
cotton
3.5 0.61
44
140 52
1) At the end of spin phase.
Off Mode (W) Left On Mode (W)
0.10 0.98
The information given in the charts above are in compliance with the EU Commission regulation 1015/2010
implementing directive 2009/125/EC.
First use
Ensure that the electrical and water con-
nections comply with the installation in-
structions.
Remove the polystyrene block and any
material from the drum.
Pour 2 litres of water into the main wash
compartment
of the detergent drawer
in order to activate the ECO valve. Then
run a cotton cycle at the highest temper-
ature without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main wash
compartment and start the machine.
10
www.zanussi.com
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments