Zanussi ZWI71000WA User Manual download pdf (Page 20)

Installation

Unpacking

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all transit devices so

that they can be refitted if the machine ever has

to be transported again.

After removing all the

packaging, carefully

lay machine on it's

back to remove the

polystyrene base from

the bottom.

Remove the power

supply cable and the

hose from the hose

holders on the rear of

the appliance.

Unscrew the three

bolts with the sup-

plied spanner.

Slide out the relevant

plastic spacers.

Fill the smaller upper hole and the two large

ones with the corresponding plastic plug caps

supplied in the bag containing the instruction

booklet.

Positioning

Install the machine on a flat hard floor. Make

sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that

the machine does not touch the wall or other

kitchen units.

Level the washing

machine by raising or

lowering the feet. The

feet may be tight to

adjust as they incor-

porate a self locking

nut, but the machine

MUST be level and

stable. If necessary,

check the setting with

a spirit level.

Any necessary adjust-

ment can be made

with a spanner.

Accurate levelling prevents vibration, noise and

displacement of the machine during operation.

Caution! Never place cardboard, wood or

similar materials under the machine to

compensate for any unevenness in the floor.

After having levelled the appliance, tighten the

lock nuts.

20

www.zanussi.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments