Zanussi ZWI71000WA User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
screw the pump cover again and close the
door.
Important! Every time you drain the water
through the emergency emptying hose you must
pour 2 litres of water into the main wash
compartment of the detergent drawer and then
run the drain programme. This will activate the
ECO Valve device avoiding that part of the
detergent remains unused at next washing.
What to do if…
Certain problems are due to lack of simple
maintenance or oversights, which can be solved
easily without calling out an engineer. Before
contacting your local Service Centre, please
carry out the checks listed below.
During machine operation it is possible that the
red pilot light of button 5 blinks to indicate that
the machine is not working.
Once the problem has been eliminated, press
the button 5 to restart the programme. If after all
checks, the problem persists, contact your local
Service Centre.
Problem Possible cause/Solution
The washing machine does
not start:
The door has not been closed (the button 5 red light blinks).
Close the door firmly.
The plug is not properly inserted in the power socket.
Insert the plug into the power socket.
There is no power at the socket.
Please check your domestic electrical installation.
The main fuse has blown.
Replace the fuse.
The programme selector dial is not correctly positioned and the button 5
has not been pressed.
Please turn the selector dial and press the button 5 again.
The delay start has been selected.
If the laundry are to be washed immediately, cancel the delay start.
The machine does not fill:
The water tap is closed (the button 5 red light blinks).
Open the water tap.
The inlet hose is squashed or kinked (the button 5 red light blinks).
Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked (the button 5
red light blinks).
Clean the water inlet filters. (See "Cleaning the water inlet filters" for
more details).
The door is not properly closed (the button 5 red light blinks).
Close the door firmly.
17
www.zanussi.com
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments