Zanussi ZWD14791W User Manual download pdf (Page 9)

Select the Delay Start by pressing the buttons 9

Before you start the programme, if you wish to delay the

start, press the button 9up or down repeatedly, to select

the desired delay. The corresponding icon (see "Display"

7.13) will appear in the upper part of the display.

The selected delay time value (up to 20 hours) will appear

on the display a few seconds, then the duration of the pro-

gramme will appear again.

You must select this option after you have set the pro-

gramme and before you press button 8.

You can cancel or modify the delay time at any moment,

before you press button 8.

Selecting the delayed start:

1. Select the programme and the required options.

2. Select the delay start by pressing the button 9.

3. Press button 8:

– the machine starts its hourly countdown.

– The programme will start after the selected delay

has expired.

Cancelling the delayed start after having pressed button 8:

1. Set the washing machine to PAUSE by pressing but-

ton 8.

Press one of the buttons 9 until the symbol

’ is

displayed

3. Press button 8 again to start the programme.

Important! The selected delay can be changed only after

selecting the washing programme again.

The Delay Start cannot be selected with DRAIN

programme.

Start the programme by pressing button 8

To start the selected programme, press the button 8, the

green pilot light of the button 8 stops blinking.

To interrupt a programme which is running, press the but-

ton 8: the green pilot light starts blinking.

To restart the programme from the point at which it was

interrupted, press the button 8 again. If you have chosen a

delayed start, the machine will begin the countdown. If an

incorrect option is selected, the red pilot light of the but-

ton 8 blinks 3 times and the message Err is displayed for

a few seconds.

Altering an option or a running programme

It is possible to change some options before the pro-

gramme carries them out .

Before you make any change, you must PAUSE the appli-

ance by pressing the button 8 .

Changing a running programme is possible only by reset-

ting it. Turn the programme selector dial to

and then

to the new programme position. Start the new programme

by pressing the button 8 again. The washing water in the

tub will be not emptied out.

Interrupting a programme

Press the button 8 to interrupt a programme which is run-

ning, the corresponding green pilot light starts blinking.

Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to to cancel a programme which

is running.

You can select now a new programme.

Opening the door

After the programme has started (or during the delay time)

the door is locked, if you need to open it, set first the ma-

chine to PAUSE by pressing the button 8.

If the door cannot be opened, this means that the machine

is already heating or that the water level is too high. Do

not try to force the door!

During drying phase the door can be opened only the first

10 minutes and at the end of drying (after Anti-Crease

phase).

If you cannot open the door but you need to open it you

have to switch the machine off by turning the selector dial

to O. After a few minutes the door can be opened (pay at-

tention to the water level and temperature!).

After closing the door, it is necessary to select the pro-

gramme and options again and to press button 8.

At the end of the programme

The machine stops automatically. Three blinking 0.00 ap-

pear on the display and the pilot light of button 8 goes off.

Some acoustic signals sound for a few minutes.

If a programme or an option that ends with water left in the

tub has been selected, the door remains locked to indicate

that the water must be emptied out before opening the

door.

Follow the below instructions to empty out the water:

1. Turn the programme selector dial to O.

2. Select the draining or spinning programme.

3. Reduce the spin speed if needed, by pressing the

relevant button.

4. Press button 8.

At the end of the programme, turn the programme selector

dial to O to switch the machine off.

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments

Zanussi ZWD14791W User Manual Page 9

Comments to this Manuals

Related products and manuals for Washing machines Zanussi ZWD14791W